StarPro Greens Centipede Ultra Artificial Grass Turf

$2.89 /sq. ft.

  • IDEAL for creating beautiful front or back lawns or fairways for golf practice
  • COLOR - field green and apple green blades with tan and green thatch
  • NOT BEST FOR PETS - too dense and plush for dog waste to quickly drain.
  • HEIGHT - 1.6 inch
  • DENSITY - 60 ounce blade weight, 82 ounce gross weight (see "How To Compare Grass" below)
  • BACKING - DuraLock PU sturdy backing with drain holes every 3"
  • LOW MAINTENANCE - No mowing, weeding, fertilizing or watering, ever!

StarPro Centipede Ultra is our designer turf and a great choice for creating maintenance-free front and back lawns. It looks like real grass because 1.6 in. field green and apple green grass blades are held upright by an interwoven tan and green thatch. This synthetic turf features new C and S shaped blade profiles that stand straighter, especially when infilled with sand. This is a dense grass with 60 oz. of grass blades per square yd. The DuraLock PU backing has 1/2 in. drain holes every 3 in. so rainfall passes through at 50 in. per hour. It’s ideal for outdoor areas where you need a beautiful lawn that doesn’t require watering or mowing or where it’s hard to grow natural grass. It’s environmentally safe. Grass blades are UV stabilized to help grass withstand sunlight without color fading so it maintains a natural look as a thick freshly mowed natural lawn.

Scroll down to order.

How To Measure?

Rolls are 15 feet wide; therefore turf is sold in 15 foot increments. Choose your custom length. Example: If you need a 10' x 15' strip, enter quantity 150 to get one 10 x 15 ft. strip = 150 sq. ft. Please call 404-295-0601 for design or calculation assistance.


To order call 404-295-0601

Shipping Info

15 to 105 square feet is $85 freight cost. 120 feet or greater is $185 max flat rate in most states or $228 in 9 states. Delivered to your driveway.

SHIPPING INSPECTION - Please inspect your turf package carefully before accepting delivery from the shipping carrier. If you see tears in the plastic packaging, make sure the turf is not damaged.  If the turf is damaged, do not accept and tell the shipper you are rejecting due to shipping damage.


How to Compare Grass


Quality is best with higher grass blade height and density (total  blade weight in a square yard, measured in ounces.)




Grass Use Pets



Blade Density
SPG-B Golf Border Yes $2.68 1.125" 60oz
SPG-70 Yards Yes $2.59 1.5" 50oz
SPG-80 Yards Yes $2.89 1.6" 60oz
SPG-90 Yards No $3.15 1.75" 80oz
SPG-100 Yards Yes $3.30 2.1" 80oz
SPG-US Yards Yes $3.00 1.75" 70oz
SPG-DOG Back Yard Yes $2.70 1.125" 60oz

INSTALLATION - Read or download How To Install Artificial Grass. Here's a summary: Cut any existing grass with a weed eater to the soil. Remove debris. Adjust soil to desired grade and compact. Add 2" of 3/8" minus gravel screenings, meaning your gravel supplier has passed gravel through a 3/8" screen so only the smallest pieces pass through. This mix has small particles as well as gravel up to 3/8" and every size in between. You'll need about 12 pounds of gravel per square foot. Use a concrete rake or drag a 3-foot 2x4 across the gravel to level it where needed. Do not use pea gravel or sand. This gravel base will promote drainage and provide a smooth surface. Compact the gravel base with a water-filled roller or plate compactor rented from your home store. Use a hand tamper for small areas. Artificial grass comes in 15-foot wide rolls and the manufacturing process causes blades to lean in one direction (the grain). Before you cut grass into pieces, plan your cuts so when all pieces are laid side by side their grain always faces the same direction to avoid obvious seams. Plan ahead by making a drawing of your lawn area to calculate how to cut grass to keep the grain in one direction. Synthetic grass can be cut with a razor knife or carpet knife (best if cut from the back side). Grass pieces are joined with seam tape. Click to read How To Seam Artificial Grass Turf with photos showing how to use StarPro seam tape and tubes of Liquid Nails Fuze It All Surface Construction Adhesive. Let adhesive dry before staking grass in the next step. For soft or sandy soil, nail the grass edges every 6 to 12 inches using nylon or plastic 8” landscape spikes or 6” metal nails that are galvanized to deter rusting. For hard soil you can nail edges every 12 inches using landscape spikes or galvanized 4” nails. Add extra nails in high traffic areas. Use a soft rake, brush, or power rake against the grain to stand the grass blades up. Infilling the grass with medium to coarse sand is highly recommended. It improves the look, weight, feel, drainage, life expectancy, and makes the blades stand up straight. Once the seam glue is dry, pour 1/2″ of sand between blades and rake them so they stand straight. You’ll need about 3 pounds of sand per square foot.

MADE IN THE USA with 100% American materials with the best quality, durability and 8 year factory warranty.

ECO-FRIENDLY - Our turfs surpass all Federal and CA Proposition 65 Standards, and our factories qualify for multiple “Green” initiatives. State and local incentives are available in many areas so check with your water company or local municipality.