19′ x 32′ 5-Hole Pro Backyard / Indoor Putting Green w/Border
$3,378.00 with free shipping!
Scroll down to order.
19′ x 32′ kit includes our best professional 15′ x 28′ backyard / indoor putting green plus a two-foot wide chipping rough/second cut border, 5 golf cups, and 100′ of seam tape (to secure border to green) plus FREE SHIPPING!
StarPro Greens’ biggest putting green combined with a 2-foot rough border offers the finest golf practice experience to improve your game and lower your handicap. The total size is 19 feet x 32 feet!
With a green of this magnitude you can practice so many kinds of shots, chipping in from the rough and making long putts back and forth between any of the 5 practice holes. Challenging breaks and contours can be created to be as realistic as country club green. Your putts travel at the same 10-11 stimp speed as on real grass, and that putting speed is consistent in any direction across StarPro Greens’ Master Putting Turf.
Our golf turf is “World’s Best” because of how it’s made. The putting surface is UV stabilized ¾” twisted nylon filaments, heat set, then sheared smooth to .56 inch. It’s backed with 4-layers: scrim fabric, natural rubber precoat, heavy action-back mesh and a natural rubber non-skid hex base. This backing is why our turf lays and plays flat so your ball rolls realistically. It even feels like you are walking on a real golf green. Putting practice on StarPro Greens is as real as it gets!
The border/rough is made from StarPro’s SPG-B Border/Rough Turf with a high-density low-pile 1″ height that makes the ball stop and sit up for your next shot. It is factory-cut to fit the green and secured to it with the 5 rolls of seam tape included in this kit.
You can install this green permanently outdoors in your landscape, on roll it out on your patio, pool side, or in a very large indoor room.
- TOTAL SIZE WITH BORDER 19 x 32 feet - kidney shape.
- PUTTING GREEN SIZE 15 x 28 feet.
- INSTALL outdoors, patio, indoors.
- 5 GOLF CUPS INCLUDED - choose in-ground (outdoors) or StarBall (indoors).
- TURF - StarPro's "Best In The World" Master Putting Turf.
- PLAYS LIKE A REAL GOLF GREEN with 10-11 stimp speed in all directions.
- CONTOURS - can create breaks outdoors or indoors.
- PUTTS - long challenging putting between 5 holes.
- COLOR - spring green and forest green, looks and plays great year round.
- GREEN TURF HEIGHT - .56 inch.
- GREEN DENSITY - 44 ounce blade weight, 95 ounce gross weight.
- GREEN BACKING - Outstanding 4-layer backing creates realistic putts even over contours and gradients.
- BORDER TURF HEIGHT - 1 inch.
- BORDER TURF DENSITY - 58 ounce blade weight, 80 ounce gross weight.
Your putting green comes with 5 included golf cups, so you practice long and challenging hole to hole shots.
Play the following video to learn how to putt StarPro's 9-hole tournament play pattern on your green.
In Ground Golf Cups
For outdoor lawn installations, choose our in-ground regulation size golf cups.
Starball Golf Cups
For indoor or patio installations, choose Starball golf cups that require no holes. Play this video...
Further down this page are Outdoor and Indoor Installation Instructions.
Order This Green & Border Kit
You can quickly install outdoors on a patio or pool deck following the indoor instructions below. Choose a location where rain drains away from the green.
For greens installed in your yard, choose our In Ground Putting Cups when ordering the green.
For detailed do-it-yourself outdoor installation with photos see Backyard Putting Green Installation
Outdoor Installation Summary: Roll out the green where you plan to install it. Use a level to check the slope, which should not exceed 2" rise over a 10 foot run for realistic golf practice. Level the area if needed. Outline the edge of the green into the grass/soil with an flat shovel or weed eater. Roll up and remove the green. Cut any existing grass with a weed eater to the soil. Remove debris. Add 2" of 3/8" minus gravel screenings, meaning your gravel supplier has passed gravel through a 3/8" screen so only the smallest pieces pass through. This mix has small particles as well as gravel up to 3/8" and every size in between. You'll need about 12 pounds of gravel per square foot. Do not use pea gravel or sand. Drag a 3-foot 2x4 across the gravel to level it where needed. Make a gentle crown in the center of your green and taper to the edges so rain drains to the sides. Create contours and breaks as desired. Compact the gravel base with a water-filled roller or plate compactor rented from your home store. Use a hand tamper for small areas. Roll out the green and check your contours, adjust as desired. Our factory-cut greens have 5 holes partially pre-cut and held in with tabs. You can remove any or all, or cut your own holes anywhere (use a putting cup as a stencil and cut with a razor knife with a new blade). To install the cups put the green in place, and remove the gravel (onto a piece of cardboard or bucket) so each cup is 1/4" below the green surface. After all cups are set, roll up the green and compact gravel around the holes. If you bought the optional border for the green, install the same way, securing it underneath to the green with the seam tape we include when you buy our kit including a green, border, and seam tape. The seam tape doesn't have adhesive and is used in combination with adhesive you buy separately from your local home improvement warehouse: Liquid Nails Heavy Duty Construction Adhesive FUZE. You'll need about one standard tube for 10' to 20' linear feet of seam tape. For detailed do-it-yourself outdoor installation with photos see our installation instructions.
Indoor or Patio Installation
For indoor or patio greens choose our StarBall Putting Cups when ordering the green.
Indoor Installation Summary: Lay your green out with the backing side up. Our factory-cut greens have 5 holes partially pre-cut and held in with tabs. You can remove any or all with a razor knife with a new blade. Roll the green out and start putting! Please read our Indoor Installation Instructions for our pre-cut greens to see photo tips for how to tune your StarBall cups, how to create contours and breaks with sandbags or cardboard, how to roll up and store your green, and clean it.
Questions? Call Dan Selton at 404-295-0601 for sales advice or installation help.
Specifications for StarPro’s Master Putting Turf (MPT)
100% MADE IN THE USA by the world's best artificial turf manufacturer so you get the quality, durability and warranty of the biggest brands.
FACTORY WARRANTY – 8 years outdoors, lifetime warranty indoors.
EXTREME DURABILITY – StarPro’s Master Putting Turf (MPT) is made with a high density UV stabilized nylon face and natural rubber. The four layer backing keeps the turf flat, supple and allows it to bridge subsurface irregularities for easy installation and a smooth true golf ball roll.
MATERIALS – 42 oz. nylon face weight and 95 oz. gross weight per square yard. The 3/4″ twisted UV stabilized nylon filaments in the turf are heat set and sheared smooth to .56″ atop a 4-layer backing consisting of a nylon scrim layer, a natural rubber precoat, a heavy action back mesh layer, and a 2 mm natural rubber base coating embossed with a hex non skid pattern.
ECO-FRIENDLY – Our turfs surpass Federal and CA Proposition 65 Standards, and our factories qualify for multiple “Green” initiatives.
RELIABILITY – We have been in business since 2006 making DIY golf greens and synthetic turf that look natural, healthy, well watered, weeded, and freshly mowed 24/7/365.
Add value to your home, improve your game, lower your score and enjoy years of fun for family and friends on the most realistic and challenging putting greens in the world. With the best turf made, multiple target holes, and easy installation, StarPro Greens delivers a lifetime of fun and putting practice that is as real as it gets.