StarPro SPG-90 Elite Artificial Grass Turf

INSTALLATION - Read or download How To Install Artificial Grass. Here's a summary: Cut any existing grass with a weed eater to the soil. Remove debris. Adjust soil to desired grade and compact. Add 2" of 3/8" minus gravel screenings, meaning your gravel supplier has passed gravel through a 3/8" screen so only the smallest pieces pass through. This mix has small particles as well as gravel up to 3/8" and every size in between. You'll need about 12 pounds of gravel per square foot. Use a concrete rake or drag a 3-foot 2x4 across the gravel to level it where needed. Do not use pea gravel or sand. This gravel base will promote drainage and provide a smooth surface. Compact the gravel base with a water-filled roller or plate compactor rented from your home store. Use a hand tamper for small areas. Artificial grass comes in 15-foot wide rolls and the manufacturing process causes blades to lean in one direction (the grain). Before you cut grass into pieces, plan your cuts so when all pieces are laid side by side their grain always faces the same direction to avoid obvious seams. Plan ahead by making a drawing of your lawn area to calculate how to cut grass to keep the grain in one direction. Synthetic grass can be cut with a razor knife or carpet knife (best if cut from the back side). Grass pieces are joined with seam tape. Click to read How To Seam Artificial Grass Turf with photos showing how to use StarPro seam tape and tubes of Liquid Nails Fuze It All Surface Construction Adhesive. Let adhesive dry before staking grass in the next step. For soft or sandy soil, nail the grass edges every 6 to 12 inches using nylon or plastic 8” landscape spikes or 6” metal nails that are galvanized to deter rusting. For hard soil you can nail edges every 12 inches using landscape spikes or galvanized 4” nails. Add extra nails in high traffic areas. Use a soft rake, brush, or power rake against the grain to stand the grass blades up. Infilling the synthetic turf with sand is not required, but it is recommended. Adding sand into the artificial turf will increase the support of the grass blades, standing them straighter, plus it adds softness and weight to the synthetic turf, and extends the life. The amount of sand to add depends on the grass blade height. 1.5″ grass needs 1.5 pounds per square foot of sand, and 2″ needs 3  pounds per square foot.

MADE IN THE USA with 100% American materials with the best quality, durability and 8 year factory warranty.

ECO-FRIENDLY - Our turfs surpass all Federal and CA Proposition 65 Standards, and our factories qualify for multiple “Green” initiatives. State and local incentives are available in many areas so check with your water company or local municipality.

Specifications for StarPro’s Elite Artificial Grass Turf (SPG-90)

Technical Spec Sheet

Manufacturer’s Comments

Soft Touch with unique resiliency, durability built in : Fiber with spring back yarn action and longevit

y
This product is our tall and thick high end value lawn turf. It is beautiful and has a soft feel on the surface with resilency, durability and longevity.

Aesthetics : Combination of two color face yarns with two color thatch

This unique four color combination produces a very natural appearance and realistic looking turf.
Our yarns are delustered – less gloss and more natural look

A deluxe soft and lush turf

If you are looking for a great value in a high-end lawn grass, this is it.