StarPro SPG-B Putting Green Border Grass

Click to see detailed specifications for this turf.

Scroll down to order.

How To Measure?

Rolls are 15 feet wide; therefore turf is sold in 15 foot increments. Choose your custom length. Example: If you need a 10' x 15' strip, enter quantity 150 to get one 10 x 15 ft. strip = 150 sq. ft. Please call (888) 782-7776 for design or calculation assistance.

# SQ. FT.  ORDER IN INCREMENTS OF 15 SQ. FT. STARTING AT 150 FQ. FT. (10X15)

Shipping Info

Shipping is calculated at checkout.  All turf rolls are shipped via freight with curbside delivery.

SHIPPING INSPECTION - Please inspect your turf package carefully before accepting delivery from the shipping carrier. Small tears in the plastic wrap are acceptable, but make sure the turf is not damaged. If the turf is damaged, do not accept and tell the shipper you are rejecting due to shipping damage. Please take a photo and email it to info@starprogreens.com

INSTALLATION - Read or download How To Install Artificial Grass. Here's a summary: Cut any existing grass with a weed eater to the soil. Remove debris. Adjust soil to desired grade and compact. Add 2" of 3/8" minus gravel screenings, meaning your gravel supplier has passed gravel through a 3/8" screen so only the smallest pieces pass through. This mix has small particles as well as gravel up to 3/8" and every size in between. You'll need about 12 pounds of gravel per square foot. Use a concrete rake or drag a 3-foot 2x4 across the gravel to level it where needed. Do not use pea gravel or sand. This gravel base will promote drainage and provide a smooth surface. Compact the gravel base with a water-filled roller or plate compactor rented from your home store. Use a hand tamper for small areas. Artificial grass comes in 15-foot wide rolls and the manufacturing process causes blades to lean in one direction (the grain). Before you cut grass into pieces, plan your cuts so when all pieces are laid side by side their grain always faces the same direction to avoid obvious seams. Plan ahead by making a drawing of your lawn area to calculate how to cut grass to keep the grain in one direction. Synthetic grass can be cut with a razor knife or carpet knife (best if cut from the back side). Grass pieces are joined with seam tape. Click to read How To Seam Artificial Grass Turf with photos showing how to use StarPro seam tape and tubes of Liquid Nails Fuze It All Surface Construction Adhesive. Let adhesive dry before staking grass in the next step. For soft or sandy soil, nail the grass edges every 6 to 12 inches using nylon or plastic 8” landscape spikes or 6” metal nails that are galvanized to deter rusting. For hard soil you can nail edges every 12 inches using landscape spikes or galvanized 4” nails. Add extra nails in high traffic areas. Use a soft rake, brush, or power rake against the grain to stand the grass blades up. Infilling the synthetic turf with sand is not required, but it is recommended. Adding sand into the artificial turf will increase the support of the grass blades, standing them straighter, plus it adds softness and weight to the synthetic turf, and extends the life. The amount of sand to add depends on the grass blade height. 1.5″ grass needs 1.5 pounds per square foot of sand, and 2″ needs 3  pounds per square foot.

MADE IN THE USA with 100% American materials with the best quality, durability and 8 year factory warranty.

ECO-FRIENDLY - Our turfs surpass all Federal and CA Proposition 65 Standards, and our factories qualify for multiple “Green” initiatives. State and local incentives are available in many areas so check with your water company or local municipality.

Specifications for StarPro’s Master Putting Turf (MPT)

Technical Spec Sheet

Manufacturer’s Comments

Aesthetics : Combination of three color face yarns with two color thatch reflect natural colors of its environment

A unique three color combination in the face yarns is paired into a five color realistic product with green and tan thatch.
Used as a border/fringe with SPG Master Putting Green
Our yarns are delustered – less gloss and more natural look

Mini S shaped blades, diamond texturized thatch

It is essential for our “cool technology” resulting in less heat retention and cooler lawns during hot summer.
The correct use of polymers with high bulk texturizing generates optimal density. The blades stand up nicely.

Perfect measured pile height and pile weight combination for a professional pet product.

The border is of course slightly taller than our SPG Master Putting Turf: a perfect 1 1/8″ Pile Height (ASTM-D5823)
Pile weight is defined at 60 oz./square yard (ASTM-D5848).
This combination is excatly what professional Pet resorts are looking for.

A pervious backing sytem, with high permeability: backing multi-layer construction, drainage/permeability test at >800 inches/hour (ASTM D1551)

Our unique Flow Through Backing System (SPG FLOW) is a 100% Pervious Backing. Great Dimensional Stability Backing System.
Liquids will drain evenly throughout the backing.

All technical, height and weight requirements as per Pet Professionals Technical Specifications PET TURF

We add our HP feature (Hole Punched Backing)
This results in the exact technical specification sheet for PET TURF (commercial use, pet resorts, or at home).

Part of our Soft-Resilent Three Color Series

SPG BORDER TURF can be combined with:
SPG 80 (BERMUDA FAIRWAY TURF)
SPG 100 US ULTRASOFT
For perfect matching and a realistic look when paired with taller grasses or any of our SPG products